A.F.H. Mukhammad, Murni, Mujiyono, D. Nurhadiyanto, S.A. Hassan, T.W.B. Riyadi
This research is a preliminary study to determine the feasibility of the ballistic test equipment using fragment-simulating projectiles (FSP) and the ability of the rami-epoxy composite against bullet penetration. Tests have been conducted in which FSP were fired at epoxy ramie composites. Ballistic test equiment was equipped with a chronograph and high speed camera. The composites were manufactured using manual hand lay-up compression moulding 60% volume fraction. Based on the high speed camera result shows that the FSP projectile when crashing into the specimen was not in perfect position (tilted) and the ramieepoxy composite was fail in 6, 9, and 12 layers. © 2020 Published under licence by IOP Publishing Ltd.
Department of Industrial Technology, Vocational School, Universitas Diponegoro, Indonesia; Department of Mechanical Engineering Education, Universitas Negeri Yogyakarta, Indonesia; Department of Applied Mechanics, Universiti Teknologi Malaysia, Malaysia; Department of Mechanical Engineering, Universitas Muhammadiyah Surakarta, Indonesia
Research at a Glance
Register to unlock
Topics & SDG Alignment
Register to unlock
Collaboration
Register to unlock
Author Profile (Selected)
Register to unlock
References Overview
Register to unlock
Journal & Source
Register to unlock
Metadata & Integrity
Register to unlock