Achmad Arifin, Yu-Ren Wu
A cutter with inserts is suitably applied in screw rotor milling. However, the cutter design process, including arranging the inserts onto the cutter body accurately, involves numerous factors, so it is costly and lengthy to achieve a precise cutter design if performed by trial error. This study introduces an integrated optimization to simplify the cutter designing process by minimizing multi-objective factors (number of inserts, grinding stock amount, and rotor profile deviation), respecting four critical design factors (grinding allowance, insert arrangement area, insert inclination angle, and correctional offset). The uniform design was applied to obtain uniformity and representativeness in the experiment sample size, whereas radial basis function (RBF) approximated the design factors, and particle swarm optimization (PSO) predicted the optimum results. The result confirms that all objective factors were diminished significantly where the grinding allowance is the most influential factor. In addition, the rotor surface topography indicated a consistent deviation. Finally, the optimized cutter is reliable, and the integrated optimization model is effective and entirely practicable. © 2022, The Author(s), under exclusive licence to Springer-Verlag London Ltd., part of Springer Nature.
Department of Mechanical Engineering, National Central University, 300, Zhongda Rd., Zhongli District, Taoyuan City, 320317, Taiwan; Department of Mechanical Engineering Educations, Universitas Negeri Yogyakarta, 01, Colombo Rd, Karangmalang, Yogyakarta, 55281, Indonesia
